Pharmaceutical and Process Control Literature References - IPS Lasers

Need a custom solution? We’re here to help.

Need a custom solution? We’re here to help.

IPS Literature References

Raman Spectroscopy - Pharmaceutical and Process Control

Y. Lee, et al., “Simple transmission Raman measurements using a single multivariate model for analysis of pharmaceutical samples contained in capsules of different colors,” Talanta, 89, 109 (2012).

M.J. Kayatin, and V.A. Davis. “In Situ polymerization functionalization of single‐walled carbon nanotubes with polystyrene.” Journal of Polymer Science Part A: Polymer Chemistry 51.17 3716 (2013).

M. Sovago, et al, “Nanoparticle detection in aqueous solutions using Raman and Laser Induced Breakdown Spectroscopy.” Spectrochimica Acta Part B: Atomic Spectroscopy 87, 182 (2013).

C. Shende, et al., “Drug Stability Analysis by Raman Spectroscopy,” Pharmaceutics, 6, 651 (2014).

A. Khmaladze, et al., “Human Oral Mucosa Tissue-Engineered Constructs Monitored by Raman Fiber-Optic Probe,” Tissue Engineering Part C: Methods. 21, 46 (2015).

R.D.L. Smith, et al., “Accounting for the Dynamic Oxidative Behavior of Nickel Anodes,” J. Am. Chem. Soc., 138, 1561 (2016).

M. Hattori and M. Otsuka, “Analysis of the stabilization process of indomethacin crystals via π–π and CH–π interactions measured by Raman spectroscopy and X-ray diffraction, Chemical Physics Letters, 661, 114 (2016).

S. Masango https://www.sciencedirect.com/science/article/abs/pii/S0009261416306467et al., “Probing the Chemistry of Alumina Atomic Layer Deposition Using Operando Surface-Enhanced Raman Spectroscopy,” J. Phys. Chem. C, 120, 3822 (2016).

M. Reichinger, et al., “Interface and volume transport on technical cataphoretic painting: A comparison of steel, hot-dip galvanised steel and aluminium alloy,” Electrochimica Acta, 231, 135 (2017).

M.S. Weimer, et al. “Template-free vapor-phase growth of patrónite by atomic layer deposition.” Chemistry of Materials 29.7, 2864 (2017).

M.S. Weimer, et al. “Oxidation state discrimination in the atomic layer deposition of vanadium oxides.” Chemistry of Materials 29.15, 6238 (2017).

O.D. Supekar, et al., “Real-Time Detection of Reverse-Osmosis Membrane Scaling via Raman Spectroscopy,” Ind. Eng. Chem. Res., 57, 16021 (2018).

R.A. Hackler et al., “Analysis of TiO2 Atomic Layer Deposition Surface Chemistry and Evidence of Propene Oligomerization Using Surface-Enhanced Raman Spectroscopy,” Journal of the American Chemical Society 2019 141 (1), 414-422 (2018)

C.J.F. Bertens, et al., “Confocal Raman spectroscopy: Evaluation of a non-invasive technique for the detection of topically applied ketorolac tromethamine in vitro and in vivo,” International Journal of Pharmaceutics, 570, 118641 (2019).

R. Tanaka, et al., “Application of spray freeze drying to theophylline-oxalic acid cocrystal engineering for inhaled dry powder technology,” Drug Development and Industrial Pharmacy, 46:2, 179 (2020).

N. Tavassoli, et al. “TOGA feature selection and the prediction of mechanical properties of paper from the Raman spectra of unrefined pulp.” Analytical and Bioanalytical Chemistry 412, 8401 (2020).

A.P. Skinner, et al., “Dense carbon nanotube array-ionic electroactive polymer composite actuators”, Proc. SPIE 11587, Electroactive Polymer Actuators and Devices (EAPAD) XXIII, 115871F (2021).

D.J. Park, et al., “Real-time monitoring of calcium sulfate scale removal from RO desalination membranes using Raman spectroscopy,” Desalination, 497, 114736 (2021).

Y. Shin, et al., “Microfluidic Multi-Scale Homogeneous Mixing with Uniform Residence Time Distribution for Rapid Production of Various Metal Core–Shell Nanoparticles. Adv. Funct. Mater. 31, 2007856 (2021).

K. Sadura, et al., “Colored Tattoo Ink Screening Method with Optical Tissue Phantoms and Raman Spectroscopy,” Materials,14, 3147 (2021).

M. Pierpaoli, et al., “Simultaneous opto-electrochemical monitoring of carbamazepine and its electro-oxidation by-products in wastewater,” Journal of Hazardous Materials, 419, 126509 (2021).

F.V. Oberhaus and D. Frense, “Catalysing electropolymerization: High-quality polythiophene films for electrochemical sensors by the utilization of fluorine based Lewis acid catalysts,” Electrochimica Acta, 402, 139536 (2022).

313 Enterprise Drive
Plainsboro, NJ 08536
(732) 230-1601

Can’t find what you’re looking for?

We’re happy to help. Fill out our contact form, or email us directly at [email protected]

313 Enterprise Drive
Plainsboro, NJ 08536
(732) 355-1601

[email protected]

© 2023 Innovative Photonic Solutions. All right reserved.